The Corner L Clamp is commonly fitted to the baseplate to allow a part to be located in a corner.
The Corner L Clamp is designed for use of clamping parts in a corner. The serrations allow backlighting along the sides of the part so that measurements can be taken on a vision machine. The workpiece is located in a corner position in the clamp using LEE-30 Thumb nut.The clamp acts as a fixed point against which a workpiece can be located against.

The Corner L Clamp is fitted onto the baseplate female threads using the LEE-30 thumb nut or low head capscrew, tightened in position using the allen key provided. Typicaly the Corner L Clamp is fitted onto a standoff to allow it be used at a height away from the baseplate.
In order to fully appreciate the way in which this component is used we recommend that you view the ‘typical applications page’ in the product catalogue, manual or on our website at http://www.leecosfixture.com.

For general cleaning, a mild soap and water solution can be used applied with a cloth or sponge. For removal of grease or oily deposits methylated spirits can be applied with a cloth or sponge. In both cases the part should be finally rinsed in cold water and thoroughly dried.